Our Favorite Beetle : "TAZ "CURRENT MILEAGE:
Shop at BestPrices.Com!
Cooling Fan Installation Translate this page
using FreeTranslation.com
READ THE MANUAL FIRST!
You will need a FLAT surface to complete
this repair for your safety.
READ ALL OF
THIS PROCEDURE SEVERAL TIMES SO THAT YOU UNDERSTAND IT. DO NOT
PERFORM THE PROCEDURE OUT OF ORDER. THIS WILL RESULT IN DEATH
OR SERIOUS INJURY.
Read our
Safety page
too.
We have available
for download the complete procedure on our
DOWNLOADS page
This
procedure is different from the one listed in the Bentley Manual
TOOLS NEEDED:
10, 13 and
21mm end wrenches
36mm socket 1/2 or
3/4 in drive
1/2 or 3/4 inch
drive ratchet
Flat Blade
screwdriver
1/2 or 3/4 inch
drive torque wrench
Parts needed:
Cooling fan (Type 1 - 1600cc - 113-119-031B)
Procedure for installation
Install the 36mm nut on
the squirrel cage cooling fan.
Torque down nut.
Install the alternator
pulley.
Install the alternator
in the Doghouse. Tighten the four Bolts.
Torque down
Bolts.
Tighten the
Alternator/Generator bracket.
Torque down
Bolts.
Install the 10 mm bolts
to the bolting points at the point in which the Doghouse and the
cylinder tin are bolted together.
Torque down
Bolts.
Install the belt.
Tighten the belt to the generator pulley.
Torque down nut.
Use the procedure listed
on Engine
Installation
Page last
updated:
Tuesday, 16 September 2008 18:07:39 -0500
remote web site uptime and availability monitoring tool
If you are having problems seeing images
on this site, see
If you have suggestions for topics. please
email me at
Topics
If you have Questions: email me at
Questions
