Clutch Cable Removal


This site is a member of WebRing. To browse visit Here.

For best results: this site requires that cookies be enabled for proper operation - see Legal Page for more info

Our Favorite Beetle : "TAZ" CURRENT MILEAGE:

Clutch Cable Removal

Translate this page using FreeTranslation.com

	READ THE MANUAL FIRST!
	You will need a FLAT surface to complete this repair for your safety.
	READ ALL OF THIS PROCEDURE SEVERAL TIMES SO THAT YOU UNDERSTAND IT. DO NOT PERFORM THE PROCEDURE OUT OF ORDER. THIS WILL RESULT IN DEATH OR SERIOUS INJURY.
	*Read our Safety* page too.**

We have available for download the complete procedure on our DOWNLOADS page

TOOLS NEEDED:

Loosen the lug bolts of the drivers side rear wheel.
Lift VW using Rear Lifting procedure.
Have a second person step on clutch pedal.
If "loading" tube moves more than 1/8" (.125) 3mm Replace Loading Tube
Clamp down with Locking pliers (a.k.a Vise Grips^TM) on to the clutch cable; NOT THE THREADS!!!
Spin the adjuster off.
Turn adjuster rod in towards the pedal cluster.
Remove the pedal cluster and the accelerator cable out AFTER you disconnect it from the carburetor.
Disconnect Clutch cable from Hook