Torque Specifications
On Type 2
Translate this page
using FreeTranslation.com
Below are the torque specs for 1968 - 1979 Type 2.
If you know of any prior to 1967, please let me
know. For 2.0 Liter engine see Torque
Specs Type 4 We have available
for download the complete specification on our
DOWNLOADS page.
These charts are in
Foot-pounds (LB FT), Newton Meter (Nm) and Meter Kilograms (mkg)
1968 - 1979
Engine (Single Carb 1600cc)
| Torque Wrench settings |
LB FT |
Nm |
mkg |
| Connecting rod screws |
24 |
32.5 |
3.3 |
| Crankcase screws M8 (halves) |
14 |
19.0 |
2.0 |
| Crankcase screws M12 (halves) |
25 |
33.8 |
3.5 |
| Cylinder head nuts |
23 |
31.2 |
3.2 |
| Rocker shaft to Cylinder head nuts |
18 |
24.4 |
2.5 |
| Heat Exchangers on cylinder head |
14 |
19.0 |
2.0 |
| Muffler clamps |
7 |
9.5 |
1.0 |
| Intake manifold to cylinder head (M6) |
14 |
19.0 |
2.0 |
| Intake manifold to cylinder head (M8) |
14 |
19.0 |
2.0 |
| Preheating pipe flange bolts |
7 |
9.5 |
1.0 |
| Oil pump nuts |
14 |
19.0 |
2.0 |
| Oil drain plug |
25 |
33.8 |
3.5 |
| Oil strainer cover nuts |
5 |
6.7 |
0.7 |
| Oil cooler to crankcase |
5 |
6.7 |
0.7 |
| Oil filler and breather to generator stand |
40 |
54.2 |
5.5 |
| Flywheel gland nuts |
253 |
343.0 |
35.0 |
| Clutch to Flywheel bolt |
18 |
24.4 |
2.5 |
| Spark Plugs |
25 |
33.8 |
3.5 |
| Engine to Transmission nut |
22 |
29.8 |
3.0 |
| Engine bearer to crankcase (M8) |
18 |
24.4 |
2.5 |
| Engine bearer to crankcase (M10) |
29 |
39.3 |
4.0 |
| Engine bearer to Engine bearer mounting (M10) |
29 |
39.3 |
4.0 |
| Generator Pulley |
43 |
58.3 |
6.0 |
| Special nut for Fan (M12) |
43 |
58.3 |
6.0 |
| Crankshaft Pulley bolt |
32 |
43.4 |
4.5 |
| Engine bearer mounting to Body nut |
18 |
24.4 |
2.5 |
| Torque Wrench settings |
LB FT |
Nm |
mkg |
| Connecting rod screws |
24 |
32.5 |
3.3 |
| Crankcase nut M8 (halves) |
14 |
19.0 |
2.0 |
| Crankcase nut M10 (halves) |
25 |
33.8 |
3.5 |
| Cylinder head nuts |
23 |
31.2 |
3.2 |
| Rocker shaft to Cylinder head nuts |
10 |
13.6 |
1.4 |
| Heat Exchangers on cylinder head |
16 |
21.7 |
2.2 |
| Muffler to Heat Exchangers nut |
14 |
19.0 |
2.0 |
| Oil drain plug |
16 |
21.7 |
2.2 |
| Oil strainer cover nuts |
5 |
6.7 |
0.7 |
| Oil pan cover to crankcase |
9 |
12.2 |
1.3 |
| Drive plate to crankshaft screw |
65 |
88.1 |
9.0 |
| Hub to crankshaft bolt |
23 |
|
3.2 |
| Fan to hub screw |
14 |
19.0 |
2.0 |
| Oil filler and breather to generator stand |
40 |
54.2 |
5.5 |
| Extension shaft with pulley to fan bolt |
14 |
19.0 |
2.0 |
| Spark Plugs |
22 |
29.8 |
3.0 |
| Engine to Transmission nut |
22 |
29.8 |
3.0 |
| Engine bearer support to crankcase (M8) |
22 |
29.8 |
3.0 |
| Boned rubber mounting to support / Engine bearer
nut |
14 |
19.0 |
2.0 |
| Engine bearer to Engine bearer mounting nut |
14 |
19.0 |
2.0 |
| Engine bearer mounting to Body nut |
14 |
19.0 |
2.0 |
| Oil pump to crankcase nut |
14 |
19.0 |
2.0 |
| Oil cooler to crankcase nut |
5 |
6.7 |
0.7 |
| Flywheel to crankshaft bolt |
80 |
108.5 |
11.0 |
| Clutch to Flywheel bolt |
18 |
24.4 |
2.5 |
| Torque converter to drive plate bolt |
14 |
19.0 |
2.0 |
| Torque Wrench settings |
LB FT |
Nm |
mkg |
| Front Axle to frame bolt |
65 - 90 |
88.1 - 122.0 |
9.0 - 12.5 |
| Upper Shock absorber mounting nut |
36 |
48.8 |
5.0 |
| Lower Shock absorber mounting nut |
18 - 25 |
24.4 - 33.8 |
2.5 - 3.5 |
| Ball joints to steering knuckle (use new nuts in
place of the ones that were removed) |
72 |
97.6 |
10 |
| Clamp screw for wheel bearing clamp nut |
11 - 14 MAX |
14.9 - 19.0 MAX |
1.5 - 2.0 MAX |
| Tie rods and drag link M10 (castellated) nut |
18 |
24.4 |
2.5 |
| Tie rods and drag link M12 (castellated) nut |
22 |
29.8 |
3.0 |
| Clamps for tie rods and drag link (nut/bolt) |
11 |
14.9 |
1.5 |
| Steering damper to relay lever bolt |
29 - 32 |
39.3 - 43.4 |
4.0 - 4.5 |
| Steering damper to axle tube bolt |
29 - 32 |
39.3 - 43.4 |
4.0 - 4.5 |
| Setscrew for torsion bar |
29 |
39.3 |
4.0 |
| Locknut for setscrew |
29 |
39.3 |
4.0 |
| Stabilizer bar to torsion bar nut (M8) |
18 |
24.4 |
2.5 |
| Stabilizer bar to torsion bar nut (M10) |
25 - 36 |
33.8 - 48.8 |
3.5 - 5.0 |
| Steering (up to July 1972 |
|
|
|
| Steering gear to side member bolt |
25 - 36 |
33.8 - 48.8 |
3.5 - 5.0 |
| Drop arm to shaft nut |
58 - 80 |
78.6 - 108.5 |
8.0 - 11.0 |
| Relay lever to shaft bolt |
43 |
58.3 |
6.0 |
| Steering wheel to column nut |
18 - 22 |
24.4 - 29.8 |
2.5 - 3.0 |
| Flange to steering worm nut |
14 |
19.0 |
2.0 |
| Coupling disc to flange (castellated) nut |
11 |
14.9 |
1.5 |
| Steering column to floor plate screw |
3.5 |
4.7 |
0.5 |
| Steering gear case cover bolt |
18 |
24.4 |
2.5 |
| Steering gear end cover bolt |
11 |
14.9 |
1.5 |
| Steering (from August 1973) |
|
|
|
| Drop arm to shaft nut |
101 |
136.9 |
14.0 |
| Locknut for adjuster |
36 - 43 |
48.8 - 58.3 |
5.0 - 6.0 |
| Steering wheel to column nut (1973 and 1974
models) |
18 - 22 |
24.4 - 29.8 |
2.5 - 3.0 |
| Steering wheel to column nut (1975 and later
models) |
36 |
48.8 |
5.0 |
| Torque Wrench settings |
LB FT |
Nm |
mkg |
| Gears/housing nut |
160 |
216.9 |
22.0 |
| Round nut/pinion |
145 |
196.6 |
20.0 |
| Union nut/sleeve |
22 |
29.8 |
3.0 |
| Bracket/reverse shifter shaft on gear carrier bolt |
18 |
24.4 |
2.5 |
| Support/rocket lever on gear carrier bolt |
18 |
24.4 |
2.5 |
| Selector shaft/fork bolt |
18 |
24.4 |
2.5 |
| Locking screw with dog point bolt |
11 |
14.9 |
1.5 |
| Clamp sleeve on gear carrier |
32 |
43.4 |
4.5 |
| Shift housing to gear carrier |
11 |
14.9 |
1.5 |
| Nuts for gear carrier, side cover, transmission,
and clutch housing |
14 |
19.0 |
2.0 |
| Ring Gear to differential housing bolt |
36 |
48.8 |
5.0 |
| Lockplate/adjusting ring screw |
`7 |
9.5 |
1.0 |
| Diagonal arm to rear wheel bearing housing bolt |
94 |
127.4 |
13.0 |
| Diagonal arm to frame bolt |
58 |
78.6 |
8.0 |
| Shock absorber to frame and rear wheel bearing
housing bolt |
43 |
58.3 |
6.0 |
| Drive shaft/flange screw |
25 |
33.8 |
3.5 |
| Cover/spring plate bushing bolt |
32 |
43.4 |
4.5 |
| Backing plate to housing (M8) bolt |
18 |
24.4 |
2.5 |
| Backing plate to housing (M10) bolt |
25 |
33.8 |
3.5 |
| Rear wheel hub to rear wheel shaft (castellated)
nut |
253 |
343.0 |
35 |
| Gearshift lever bracket to floor bolt |
14 |
19.0 |
2.0 |
| Transmission to transmission carrier bolt |
25 |
33.8 |
3.5 |
| Engine bearer to bearer brackets bolt |
18 |
24.4 |
2.5 |
| Clutch cable guide tube bracket to transmission
case nut |
14 |
19.0 |
2.0 |
| Front transmission mount support to transmission
nut |
18 |
24.4 |
2.5 |
| Engine bearer bracket to frame bolt |
25 |
33.8 |
3.5 |
| Front transmission mount support to mount support
bolt |
25 |
33.8 |
3.5 |
| Clutch release bearing guide sleeve to bell
housing nut |
11 |
14.9 |
1.5 |
| Pinion bearing retainer to transmission case
(special) nut |
22 |
29.8 |
3.0 |
| Limiting stop on cross tube bolt |
33 |
44.7 |
4.5 |
| Relay Shaft bracket on gear carrier (special) bolt |
14 |
19.0 |
2.0 |
| Torque Wrench settings |
LB FT |
Nm |
mkg |
| ATF pump to transmission case bolt |
2.8 |
3.8 |
0.4 |
| Transfer plate on valve body screw |
2.1 |
2.8 |
0.3 |
| Valve body to transmission case bolt |
2.8 |
3.8 |
0.4 |
| Valve body to transmission case screw |
2.5 |
3.4 |
0.35 |
| Pan to transmission case bolt |
7.0 |
9.5 |
1.0 |
| ATF strainer to valve body screw |
2.1 |
2.8 |
0.3 |
| Manual valve lever/cable lever nut |
4.3 |
5.8 |
0.6 |
| Cable lever to transmission case screw |
3.5 |
4.7 |
0.5 |
| Operating lever on transmission case threaded pin |
4.3 |
5.8 |
0.6 |
| Cable bracket on transmission case bolt |
11.0 |
14.9 |
1.5 |
| Filler tube on transmission case bolt |
3.5 |
4.7 |
0.5 |
| Plug for pressure connection/ transmission case |
7.0 |
9.5 |
1.0 |
| Vacuum unit/ transmission case |
18 |
24.4 |
2.5 |
| Lock nut for band adjusting screw |
14 |
19.0 |
2.0 |
| Air deflector on final drive housing bolt |
7.0 |
9.5 |
1.0 |
| Differential carrier on final drive housing nut |
6.0 |
8.1 |
0.8 |
| Side Cover/ final drive housing |
6.0 |
8.1 |
0.8 |
| Starter/ final drive housing nut |
18 |
24.4 |
2.5 |
| Bearing cap/ differential carrier bolt |
43 |
58.3 |
6.0 |
| Ring gear/ differential housing bolt |
36 |
48.8 |
5.0 |
| Transmission case/ final drive housing nut |
14 |
19.0 |
2.0 |
| Torque converter to drive plate bolts |
18 |
24.4 |
2.5 |
| Drive shaft/ flange screw |
25 |
33.8 |
3.5 |
| Engine/ transmission mounting nuts and bolts |
22 |
29.8 |
3.0 |
| Transmission/ transmission carrier bolt |
25 |
33.8 |
3.5 |
| Front transmission mount limiting stop to bonded
rubber mounting bolt |
33 |
44.7 |
4.5 |
| Bonded rubber mounting to transmission case nut |
18 |
24.4 |
2.5 |
| Selector lever cable clamp nut |
7.0 |
9.5 |
1.0 |
| Torque Wrench settings |
LB FT |
Nm |
mkg |
| Master Cylinder |
|
|
|
| Stop screw in housing |
3.5 - 7.0 |
4.7 - 9.5 |
0.5 - 1.0 |
| Residual pressure valve on housing |
14 |
19.0 |
2.0 |
| Brake light switch to housing |
14 |
19.0 |
2.0 |
| Master Cylinder to frame bolts |
18 |
24.4 |
2.5 |
| Brake line to master cylinder union nut |
11 - 14 |
14.9 - 19.0 |
1.5 - 2.0 |
| Push rod (locknut for clevis) |
11 - 14 |
14.9 - 19.0 |
1.5 - 2.0 |
| Master Cylinder on frame bolts (1968 - 1970) |
18 |
24.4 |
2.5 |
| Master cylinder to servo nut (1971 on) |
`9.4 Max |
12.7 MAX |
1.3 Max |
| Front Wheel Brakes |
|
|
|
| Wheel cylinder and backing plate on steering
knuckle bolt (1968 - 1970) |
40 - 43 |
54.2 - 58.3 |
5.5 - 6.0 |
| Caliper to steering knuckle (M12) (1971 - 1972)
bolt |
72 |
97.6 |
10.0 |
| Caliper to steering knuckle (M14) (1973 on) bolt |
116 |
157.3 |
16.0 |
| Bleeder Valve in cylinder/ caliper |
3.5 Max |
4.7 MAX |
0.5 Max |
| Hose to cylinder/ caliper |
11 - 14 |
14.9 - 19.0 |
1.5 - 2.0 |
| Screw for clamp nut |
11 - 14 Max |
14.9 - 19.0 MAX |
1.5 - 2.0 Max |
| Brake Disc to wheel hub |
14 - 18 |
19.0 - 24.4 |
2.0 - 2.5 |
| Splash shield to steering knuckle bolt |
7 |
9.5 |
1.0 |
| Brake caliper halves bolt |
25 |
33.8 |
3.5 |
| Rear Wheel Brakes |
|
|
|
| Backing plate on bearing housing/ wheel cylinder
bolt (M8) |
14 - 22 |
19.0 - 29.8 |
2.0 - 3.0 |
| Backing plate on bearing housing/ wheel cylinder
bolt (M10) |
22 - 29 |
29.8 - 39.3 |
3.0 - 4.0 |
| Cover to bearing housing bolt |
43 |
58.3 |
6.0 |
| Brake drum/ rear wheel hub to shaft (castellated)
nut |
253 |
343.0 |
35.0 |
| Brake drum to wheel hub bolt |
7 - 13 |
9.5 - 17.6 |
1.0 - 1.8 |
| Wheels |
|
|
|
| Wheel to drum/disc (1968 - 1970) bolt |
94 |
127.4 |
13.0 |
| Wheel to drum/disc (1971 and later) Nut |
94 |
127.4 |
13.0 |
| Pedals |
|
|
|
| Brake pedal on pin bolt |
22 - 29 |
29.8 - 39.3 |
3.0 - 4.0 |
| Brake pedal to pushrod bolt |
14 |
19.0 |
2.0 |
| Clutch pedal on pin nut |
18 |
24.4 |
2.5 |
| Support/ Clutch pedal on frame bolt |
14 |
19.0 |
2.0 |
| Brake servo |
|
|
|
| Brake servo on front axle nut |
`9.4 Max |
12.7 MAX |
1.3 Max |
| Brake proportioning valve |
|
|
|
| Proportioning valve on side member bolt |
11 |
14.9 |
1.5 |
| Output adaptor in regulator |
14 - 16 |
19.0 - 21.7 |
2.0 - 2.2 |
