Torsion Arm Bushings Removal

 

This site is a member of WebRing.
To browse visit Here.

For best results: this site requires that cookies be enabled for proper operation - see Legal Page for more info

Home
Up

Our Favorite Beetle : "TAZ" CURRENT MILEAGE:

0 3 9 1 1 3 7 9

NOT Virtual Cards

  Shop at BestPrices.Com!

 

Torsion Arm Bushings Removal

Translate this page      using FreeTranslation.com

bullet

READ THE BENTLEY or HAYNES MANUAL FIRST!

bullet

You will need a FLAT surface to complete this repair for your safety.

bullet

READ ALL OF  THIS PROCEDURE SEVERAL TIMES SO THAT YOU UNDERSTAND IT.  DO NOT PERFORM THE PROCEDURE OUT OF ORDER.  THIS WILL RESULT IN DEATH OR SERIOUS INJURY.

bullet

Read our Safety page too.

We have available for download the complete procedure on our DOWNLOADS page

TOOLS NEEDED:

  1. 13mm, 17 mm, 19mm combination wrench

  2. 13mm Socket (3/8 or 1/2)

  3. 19mm deep socket (1/2 inch drive)

  4. 17mm socket (3/8 or 1/2)

  5. 1/2 drive break over bar

  6. 3/8 or 1/2 drive ratchet

  7. Various Extensions for ratchets

  8. Punch or Scribe

  9. Multiple shop towels (least 15)

  10. Grease (best is Lithium)

  11. 4 lbs. dead blow hammer or Sledge hammer

  12. Lineman dikes or wire cutters

  13. Floor Jack (4000 lbs. capacity)

  14. 2 jack stands

  15. 2 Wheel Chocks

  16. 2 wire coat hangers

  17. 1 roll masking tape

 

Procedure for removal

  1.  

 

 

 Page last updated: Monday, 12 November 2007 18:43:20 -0600

external website monitoring service

If you are having problems seeing images on this site, see 

If you have suggestions for topics. please email me at Topics

If you have Questions: email me at Questions

Click for Denton, Texas Forecast

 

© Copyright 2003 - 2006 WolfsbÜrg II

VOLKSWAGEN, VW, Bug, Beetle, Bus, Thing and every model of Air cooled VWs are registered TM of Volkswagen AG of Germany
This website is not affiliated with or endorsed by Volkswagen AG or Volkswagen of America, Inc. ("VWoA").